Imtron
Stationary, mobile, and automobile measuring systems
As a manufacturer of metrological components for industrial applications Imtron has become a well-known provider on the market. We manufacture systems for the processing and acquisition of physical parameters. Regardless of whether these are metrological parameters, such as pressure, temperature and distance, or angles, current or torque – with precision and reliability our components and system solutions have made their way to the top echelons of German and international technology enterprises. Finally Imtron is committed with all its energy to metrological excellence on site at our customer’s facilities.
Product Groups
Measurement Data System
CAN Compact Module Uni4
Universal amplifier supported by the Federal Ministry of Economics and Technology based on a resolution by the German Bundestag.
The SIQUAD CAN Compact Module Uni4 offers computer-controlled signal conditioning of various sensors in 1 module. It has 1 DSP per channel. Signal output is digital via CAN. The protocol is CAN 2.0B. Parameter setting is done with the software DaSoft via a USB-to-CAN interface. Signal filtering can be configured from 3..3000 Hz at 20 kS/s sample rate.
Compact Measurement System
CAN Stick
Universal amplifier supported by the Federal Ministry of Economics and Technology based on a resolution by the German Bundestag.
The SIQUAD CAN Stick offers computer-controlled signal conditioning of various sensors. It has 1 DSP per unit. There are 2 versions depending on the sensor requirements. Signal output is digital via CAN. Protocol is CAN 2.0B. Parameter setting is done with the software DaSoft via a USB-to-CAN interface. Signal filtering can be configured from 3..2000 Hz at 20 kS/s sample rate
Ethernet Compact System
SIQUAD Ethernet Compact Module Uni
The SIQUAD Ethernet Compact Module Uni offers computer-controlled signal conditioning of various sensors. The universal amplifier is using one separate DSP per channel. Parameter setting is done with the software DaSoft. Signal filtering can be configured from 3..3000 Hz at 20 kS/s sample rate. Signal output is digital via Ethernet.
Signal Transucers
Monitoring and Controlling Energy Efficiency of Photovoltaic Installations
Applications
- Solar Power Plants
- Off-Grid Systems
- Roof Systems
System
- Current and voltage supervision of solar panels
- Control of switching states
Sources
- Shunt and inductive sensors in string arrays
- Standard signals from temperature, wind speed, and irradiation sensors
- Door switches
- Digital outputs
SIQUAD Amplifiers
Characteristics
The DASIM and SIQUAD Amplifiers fit into (standard) 19” chassis and desktop housings. The housings can be tailored to customerspecific needs concerning number of units and power supply. For mobile applications a wide-range power supply is available.
DASIM Amplifiers
Measurement data acquisition systems.
For applications for test stands.
With the merger of companies, we have greatly expanded our competence and can thus also offer optimal assistance and consultation in all matters relating to measuring, control, and closed-loop control technologies.
We are capable of offering a comprehensive product portfolio for requirements in the broadest range of segments:
- Process measurement technology
- Laboratory measurement technology
- Industrial electronics / closed-loop control technology
- Industrial measurement technology
- Test stand measurement technology
- Customer-specific developments
DMS Manual Calibrator
The manual strain gauge calibrator is used for simulation of strain gauge sensors with bridge resistances of 120 W, 350 W or 1000 W. Other bridge resistances or the combination of up to 2 bridges in one housing are available on request. The device is used wherever strain gauge amplifiers need to be tested or calibrated. The sensitivity setting is done by parallel connection of resistances to a shunt arm. For switching of polarity the shunt circuit is reversed.
Sensitivity settings and switching of polarity are done manually with high-precision switches.
Universal Sensor Simulator
The GHM SensorSimulator outputs various voltage and current signals.
The GHM SensorSimulator can also simulate sensors such as Pt100, thermocouples and strain gage sensors optimally through the additional back-up measurement of the supply voltages and currents of the connected measuring amplifiers. Optionally a frequency output is available.
It can be used to calibrate and verify displays, transducers or complete measurement chains.
In addition, voltages and currents can be measured with the device.
EYMEN AUTOMATION is dealership of IMTRON.