CeYeKo FLTR series turbine flow meters have the features: high accuracy, good repeatability, convenient installation/maintenance, simple structure etc.
Liquid flows through the turbine housing causing an internal rotor to spin. As the ro-tor spins, an electrical signal is generated in the pickup coil. This signal is converted into engineering units (liters, cubic meters, gallons etc.) on the local display where is applicable. Optional accessory modules can be used to export the signal to other equipment.
CeYeKo Stainless Steel Turbine Flowmeters
CeYeKo FLTR series turbine flow meters have the features: high accuracy, good repeatability, convenient installation / maintenance, simple structure etc. Liquid flows through the turbine housing causing an internal rotor to spin.
Properties
As the rotor spins, an electrical signal is generated in the pickup coil. This signal is converted into engineering units (liters, cubic meters, gallons etc.) on the local display where is applicable. Optional accessory modules can be used to export the signal to other equipment.
Technical Specifications
Applications
FLTR series liquid turbine flowmeter is a kind of speed instrument, which has the advantages of high accuracy, good repeatability, simple structure, small pressure loss and convenient maintenance. It is used to measure the volume flow of low viscosity liquid in closed pipe. In the petroleum, chemical, metallurgy, water supply, paper and other industries with a wide range of applications.
Wetted Components
- Housing: Standard – 304 Stainless Steel (Optional – 316 Stainless Steel)
- Bearings and Shaft: Tungsten Carbide
- Rotor: Standard – 2Cr13 Stainless Steel (Optional – Alloy CD4Mcu)
- Retaining Rings: 316 Stainless Steel
Performance
- Repeatability: ±0.2%
- Accuracy: Standard: ±1% of reading
- Optional: ±0.5% of reading
Output Signal: (Where applicable)
- Sensor: Pulse signal (Low Level: ≤0.8V; High Level: ≥8V)
- Transmitter: 4 to 20 mA DC current signal
- Signal Transmission Distance: ≤1,000 m
Electrical Connections:
- Basic Type: Hausman Connector or three-core cable: ISO M20×1.5 Female
Flange Connections:
- For standard product, the flange follows GB/T 9119-2000 (ISO 7005-1) RF (Raised Face)
Operation Conditions
Ambient:
- Temperature: -10°C to +55°C
- Pressure: 86 to 106 KPa
- Relative Humidity: 5% to 90%
Fluid Temperature and Pressure:
- Temperature: -20°C to +110°C
- Pressure: Fluid pressure should be limited according to rating.
Power Supply:
- Sensor: +12V DC (Optional: +24V DC)
- Transmitter: +24V DC
- Field Display Type B: Integral 3.2V Lithium Battery (Others available on request)
- Field Display Type C: +24V DC
| Nominal Diameter | Standard Flow Rate | Extendet Flow Rate | Standard Pressure | Custimized Pressure Rating | |
| (mm) | (inch) | (m³/h) | (m³/h) | (Bar) | (Bar) – Flange Fitting |
| 4 | ⅛” | 0,04 … 0,25 m³/h | 0,04 … 0,4 m³/h | Thread: PN63 | PN120, PN160, PN250 |
| 6 | ¼” | 0,1 … 0,6 m³/h | 0,06 … 0,6 m³/h | Thread: PN63 | PN120, PN160, PN250 |
| 10 | ⅜” | 0,2 … 1,2 m³/h | 0,15 … 1,5 m³/h | Thread: PN63 | PN120, PN160, PN250 |
| 15 | ½” | 0,6 … 6 m³/h | 0,4 … 8 m³/h | Thread: PN63; Flange: PN25 | PN40, PN63, PN120, PN160, PN250 |
| 20 | ¾” | 0,8 … 8 m³/h | 0,45 … 9 m³/h | Thread: PN63; Flange: PN25 | PN40, PN63, PN120, PN160, PN250 |
| 25 | 1″ | 1 … 10 m³/h | 0,5 … 10 m³/h | Thread: PN63; Flange: PN25 | PN40, PN63, PN120, PN160, PN250 |
| 32 | 1 ¼” | 1.5 … 15 m³/h | 0,8 … 15 m³/h | Thread: PN63; Flange: PN25 | PN40, PN63, PN120, PN160, PN250 |
| 40 | 1 ½” | 2 … 20 m³/h | 1 … 30 m³/h | Thread: PN63; Flange: PN25 | PN40, PN63, PN120, PN160, PN250 |
| 50 | 2″ | 4 … 40 m³/h | 2 … 40 m³/h | Thread: PN63; Flange: PN25 | PN40, PN63, PN120, PN160, PN250 |
| 65 | 2 ½” | 7 … 70 m³/h | 4 … 70 m³/h | Thread: PN63; Flange: PN25 | PN40, PN63, PN120, PN160, PN250 |
| 80 | 3″ | 10 … 100 m³/h | 5 … 100 m³/h | Thread: PN63; Flange: PN25 | PN40, PN63, PN120, PN160, PN250 |
| 100 | 4″ | 20 … 200 m³/h | 10 … 200 m³/h | Thread: PN63; Flange: PN25 | PN40, PN63, PN120, PN160, PN250 |
| 125 | 5″ | 25 … 250 m³/h | 13 … 250 m³/h | Flange: PN16 | PN25, PN40, PN63, PN120, PN160 |
| 150 | 6″ | 30 … 300 m³/h | 15 … 300 m³/h | Flange: PN16 | PN25, PN40, PN63, PN120, PN160 |
| 200 | 8″ | 80 … 800 m³/h | 40 … 800 m³/h | Flange: PN16 | PN25, PN40, PN63, PN120, PN160 |
Data Sheets
CeYeKo FLTR Turbine Flowmeter Turkey Distributor is “EYMEN AUTOMATION“.