
ATMI
The better solution for level control: Float level!
ATMI, the specialist manufacturer of float and tilt level switches for liquids and solids.
ATMI is the only one level control company for solids and liquids in the world that offers 20 types of float level switches in 50 different versions. It allow to use devices adapted to each problem to be solved, whatever the products in which they are installed.
If you are looking for a float level switch to do all types of automatic regulations of liquids level (automation) for pumps of all powers and for others, ATMI is able to offer you all you may need.
For liquids as well as for solids and pulverulents, you will find at ATMI the float level switch that suits your need for your regulation in pumping stations of all sizes, in domestic or industrial cisterns, for level detection in industrial tanks with narrow-access for example, even for application with explosive risks.
Product Groups

BIP STOP Float Level Switches
Control level switch for the automation of clean water, waste water pumps in small tanks. The BIP STOP is a small float switch designed for the automatic control of small pumps (until 1.5 CV).
Thanks to its wide switching angle of 110º, the BIP STOP protects the pump’s engine and the electrical panels from jerking. This feature is highly appreciated in agitated liquids.
Also, it can detect the both high and low level in the same tank whose hysteresis does not exceed 1.5 meter.
These float level switches are used wherever magnetic level controllers can not be used because of impurities or deposits that may trap the float.

BIP ECO Float Level Switches
Control level switch for the automation of clean water pumps in small tanks. This float level switch (NO or NC) is the economical version of the BIP STOP. Indeed, it is technically similar to the BIP STOP but equipped with a high quality PVC cable instead of a neoprene cable.
Thanks to its wide switching angle of 100º, the BIP ECO protects the pump’s engine and the electrical panels from jerking. This feature is highly appreciated in agitated liquids.
Also, it can detect the both high and low level in the same tank whose hysteresis does not exceed 1.5 meter.
These float level switches are used wherever magnetic level controllers can not be used because of impurities or deposits that may trap the float.

AT 120 Float Level Switches
Control level switch for the automation of clean water, waste water pumps. This float switch is designed for the automatic control of pumps (until 1.5 CV) . Thanks to its wide switching angle of 120º, the BIP STOP protects the pump’s engine and the electrical panels from jerking. This feature is highly appreciated in agitated liquids.
Also, AT 120 can detect the both high and low level in the same tank whose hysteresis does not exceed 1.5 meter.
These float level switches are used wherever magnetic level controllers can not be used because of impurities or deposits that may trap the float.
This model is available with a HR HY (High Resistance HYpalon) press-vulcanised housing for applications in aggressive liquids (acids, solvents, hydrocarbons, etc .) See AT 120 HR HY

AT 120 Hr Hy Float Level Switches
AT 120 HR HY (High Resistance HYpalon)
Control level switch for the automation of aggressive liquid pumps. This float level switche is a heavy duty float level switch designed for aggressive liquids. It is encased in a HR HY press-vulcanised housing, which ensures a double waterproof, can ensure a regulation in very agressive liquids.
The AT 120 HR HY is a float switch designed for the automatic control of small pumps (until 1.5 CV). Thanks to its wide switching angle of 120º, the AT 120 HR HY protects the pump’s engine and the electrical panels from jerking. This feature is highly appreciated in agitated liquids
If your installation is located in a hazardous area, choose our ATEX certified float switch SOBA EX.

ATS 165 Float Level Switches
Control level switch for the automation of clean water, waste water pumps very agitated. This float level switch (NO or NC) allows the automation of small pumps either live (up to 1.5 HP) or unlimited through a relay.
With its 165º wide differential angle, the ATS 165 level switch provides smooth level contact on pump motors and electrical devices.
Also, it can detect both the high and low level in the same tank whose hysteresis does not exceed 1.5 m.
This model is also available in an ACS certified version for use in drinking water for human consumption.

ATS 165 EP Float Level Switches
Control level switch for the automation of drinking water pumps.
This ACS certified float level switch is constructed with special components for use in drinking water applications.
Thanks to its big switching angle of 165º, the ATS 165 protects the pump’s engine and the electrical panels from jerking. This float the ideal solution for level control in tower tanks, for example.
Also, it can detect the both high and low level in the same tank whose hysteresis does not exceed 1.5 meter.
This float level switch can be connected directly to pumps up to 1.5 HP or through a relay if working with high power pumps.
EYMEN AUTOMATION is dealership of ATMI.